ERIKS Engineer testing Equipment

SPECIALIST ENGINEERING

In addition to our product supply and repair, replace solutions we also have a selection of specialist engineering divisions which provide you and us with additional resources and knowledge to improve your production process and increase reliability. 

Specialist Engineering Services

Your asset, your choice

Our expert engineers will carry out a comprehensive onsite inspection to assess and report on the asset’s condition. You will then have all the information you need to decide whether to repair, replace or upgrade.

Our network, at your service

We have a nationwide network of workshops operating to the same fully documented procedures and ISO standards. So your asset will always receive the same expert attention and quality repair, wherever you are. And more workshops mean less waiting.

Specialist facilities

In addition to our product supply and repair, replace solutions we also have a selection of specialist engineering divisions which provide you and us with additional resources and knowledge to improve your production process and increase reliability. 

HV Motors and Coils

Solving HV Motor problems effectively starts with identifying the problems accurately.

We analyse your motor using the latest technology, to make it quicker and easier to find the real issues and provide the right solutions.

Then we repair to ISO9001:2015 standards, for guaranteed quality and service life.

ERIKS’ resources include transport up to 10 tons, and dynamic balancing upto 15 tons (min G6.3, target G2.5).

Facilities and Resources

  • Fully equipped workshop with specialist equipment for quality repairs and rewinds
  • In-house machining for reverse engineering of parts, slip ring slimming and general machining
  • Vacuum Pressure Impregnation (VPI) tank
  • Dynamic balancing
  • Comprehensive testing throughout the repair process and after final assembly
  • Diamond, hairpin and traction coil manufacture up to 12.8kV
  • Class F, Class H, resin rich, VPI and hybrid installation systems
  • Experienced electrical and mechanical engineers and active Apprentice Scheme to future proof and enhance or service
  • Dynamic balancing machines
  • Certified to the following management systems, ISO9001 and ISO45001
  • ERIKS own transport for collection and delivery
  • AEMT & EASA membership

Test Area

  • Partial discharge
  • Tan delta
  • Insulation resistance
  • Polarisation index
  • Surge testing
  • IMCA broke rotor bar

 

Capabilities

  • High-quality overhauls and rewinds
  • Technical support and advice
  • In-situ inspection and testing of motors
  • On-site offline partial discharge testing and tan delta testing of 6.6 and 11kV motors
  • Photographic inspection reports
  • Root cause failure investigation
  • Unbiased repair/replace advice
  • Full static and run tests
  • Authorised repair centre for many OEM’s
  • ATEX motor repairs

Commutators and Slip Rings

ERIKS commutator and slip ring service team is on hand to remove, repair, and re-install as standard, but can if necessary manufacture a special or redesign your existing commutator to overcome recurring problems.

Our capabilities include:

  • Commutator repair and replacement service
  • Commutator manufacturing up to 1000mm diameter
  • All types of AC Slip Rings up to 700mm in diameter
  • Made to original drawings, samples or re-designs

Additional Engineering Services

MOTORS

GEARBOXES

PUMPS

     

ELECTRONICS

HYDRAULICS

VALVES

How can we help?

What Engineering Services can you expect from ERIKS?

Dedicated Workshops Nationwide

 

ERIKS offers all the products, all the service and all the support  – all over the country.

 

Providing additional specific engineering capabilities, for our core range of repairs including motors, pumps and gearboxes.

In addition our specialist engineering service centres include HV motors repairs, coils, commutators valve repairs etc., and are supported by specialist application engineers.

The NEW Know+How Hub

The new home for ERIKS News, Blogs and Case Studies - keep up to date with all the latest news and updates in one place

The latest:

Grundfos Webinar 2024

Launching ➡️ Tuesday 29th October 2024. Grundfos Webinar focusing on Epumps with guest speakers Konr...

Scream if you wanna go more reliably!

Victor Harris

When there were repeated breakdowns at Europe’s first fully-looping rollercoaster, they needed a hea...

ERIKS in Action

Keep up to date with the latest news and updates.

 

TRAIN RELIABILITY BACK ON THE RAILS

Reliability problems with the traction motors on the channel tunnel freight trains risked affecting service levels so ERIKS engineers were asked to investigate the problems...

ERIKS CARRY OUT A PARTIAL DISCHARGE TEST TO IMPROVE HV MOTOR RELIABILITY

By carrying out a Partial Discharge Test during a high voltage (HV) machine overhaul, ERIKS can detect potential future failure points...

ERIKS EPOXY VPI IMPROVES RELIABILITY OF AIR COOLED TRANSFORMERS

ERIKS Epoxy Vacuum Pressure Impregnation "VPI" system has a proven track record of giving windings improved moisture protection and mechanical strength...

Downloads

Corporate Brochure

Condition Monitoring

First Steps to Industry 4.0

Contact

Get in Touch

Looking for a custom Product quote? Need an answer to a Technical question? Looking for Careers/HR support? Want to work with us? Interested in our Digital Trading solutions? Have a finance question? Send us your enquiry and a member of the ERIKS team will be with you quickly.

How are we doing?

We strive to deliver exceptional quality service and products. As part of this goal, we encourage customers to submit feedback on their experiences so we can resolve any issues and concerns.

Chat, call or find your local Branch

At ERIKS we strive to deliver the best quality service and products. As part of this goal we encourage customers to submit feedback on their experiences so we can resolve any issues and concerns.

Call us: +441215086000 

ERIKS Employee