CONDITION MONITORING

Right Place, Right Time, Right Solution

Our condition monitoring capabilities mean we can watch over all your key assets, learn how they're operating and propose solutions to resolve any impending issues identified.

Within Condition Monitoring we have a large range of asset evaluation services to suit your needs. Take a look at the options below.

 

 

Enginneers-condition-monitoring-testing

OPTICAL GAS IMAGING

Optical Gas Imaging (OGI) makes gas leaks visible by using specialist thermographic cameras.

Using the camera each type of gases appear as opaque in a narrowband infrared wavelength, making it possible see the gas as a weep before it becomes a leak.

ERIKS OGI surveys can form part of condition monitoring contract and are undertaken every 3-6 months depending on site requirements.

Play the video to see a 10 second example of what you can see under an OGI Camera!

Other Specialist Tests

Surge testing of Electric motor

BAKER SURGE TESTING

Surge testing electrical apparatus such as motors, generators and transformers can indicate weaknesses in their insulation system. This combined with insulation resistance and circuit resistance provides a complete summary.

Engineer TEV HV Probe testing

TEV HV PROBE TESTING

Online Partial Discharge testing of MV/HV switchgear, cable joints and transformers will prove the integrity of the electrical apparatuses’ insulation system and help troubleshoot potential issues.

Engineer Partial Discharge testing

PARTIAL DISCHARGE TESTING

Partial Discharge testing removes small sparks which indicate an electrical breakdown of insulation. Identifying issues early can negate electrical failures. 

Endoscopic inspection Equipment

ENDOSCOPIC INSPECTION SERVICES

Capable of identifying failures and discontinuities which could affect performance and lead to breakdowns on a vast amount of critical plant including but not limited to turbines, gearboxes, and compressors.

Engineer testing Ultrasound Emissions

ULTRASOUND EMISSIONS

The ultrasound emissions survey senses high frequency sounds produced by operating equipment, leaks and electrical discharges, identifying an array of issues before they develop into greater problems.

Engineer Tan Delta Testing

TAN DELTA TESTING

Measuring the loss angle (tan delta) of an insulation system, be it a motor, generator, transformer or cable, provides us with information to determine its integrity and assists in trending any potential deterioration before a catastrophic failure.

Engineer IMCA Testing

IMCA TESTING

Induction motor current analysis is a non-intrusive test which can detect broken/cracked bars in squirrel cage induction motors before a potentially catastrophic failure.

Engineers Performing Laser Alignment

LASER ALIGNMENT

Alignment of two rotating parts is performed with state of the art equipment which utilises a laser to provide ultimate precision. With this the wear on components is reduced and life expectancy increased. 

CONDITION MONITORING JUST GOT SMARTER

Introducing ERIKS e-Connect 

Where condition monitoring meets the cloud

The e-Connect system enables you to understand and resolve the root cause of asset issues with the ability to provide advanced failure warnings and under-performance identification. 

ERIKS e-Connect installed systems are available in five versions, fully extendable depending on application.

 

The NEW Know+How Hub

The new home for ERIKS News, Blogs and Case Studies - keep up to date with all the latest news and updates in one place

The latest:

Are You Hesitant to Outsource Your MRO Stores Management?

Richard Ludlam

Outsourcing MRO stores management can be a game changer for manufacturers—but many hesitate, fearing...

The Manufacturer Podcast: Decarbonising Aerospace and more

ERIKS Sponsored - The Manufacturer Podcast Episode #4 ➡️ Decarbonising Aerospace...

ERIKS in Action

Saving you time and money, each and every day

CONDITION MONITORING PACKAGE IMPROVES RELIABILITY

A large cereal manufacturer was experiencing frequent failures of equipment in remote areas of their site. They needed to learn the root cause of the failures to avoid further breakdowns...

CONDITION MONITORING IDENTIFIES MAJOR AIR LEAK ISSUE

A major food manufacturer was experiencing numerous of air leaks across multiple applications. Thanks to their condition monitoring this issue could be solved...

ENHANCED PLANT EFFICIENCY REDUCES ENERGY CONSUMPTION

An automotive manufacturer discovered they had a number of air leaks costing them in energy and money. Find out how an Air Leak Survey by ERIKS helped them identify and remedy the leaks...

Downloads

ERIKS e-Connect

Industry 4.0 Whitepaper

Condition Monitoring

First Step to Industry 4.0

Contact

Get in Touch

Looking for a custom Product quote? Need an answer to a Technical question? Looking for Careers/HR support? Want to work with us? Interested in our Digital Trading solutions? Have a finance question? Send us your enquiry and a member of the ERIKS team will be with you quickly.

How are we doing?

We strive to deliver exceptional quality service and products. As part of this goal, we encourage customers to submit feedback on their experiences so we can resolve any issues and concerns.

Chat, call or find your local Branch

At ERIKS we strive to deliver the best quality service and products. As part of this goal we encourage customers to submit feedback on their experiences so we can resolve any issues and concerns.

Call us: +441215086000 

ERIKS Employee